Pairing the NeXus

Take these steps to pair the NeXus with the computer:

  1. Switch on the NeXus;

  2. Open the Bluetooth settings on the computer* and search for new Bluetooth devices;
    *If there is no Bluetooth icon in the Windows system tray, most likely the computer does not have built-in (internal) Bluetooth.
    2.1 In that case, plug the USB Bluetooth dongle into one of the USB ports of the computer.

    Note: to use the USB Bluetooth dongle when the computer does have internal Bluetooth, deactivate the internal Bluetooth (in the Device Manager) before plugging in the dongle.

  3. Select the NeXus and enter the passcode.

    The passcode for the device are the last 4 digits of the serial number (SN) which is displayed on the ‘Enter the passcode for your device’ screen. The serial number can also be found on the product label on the NeXus.

  4. Wait for the NeXus to be paired (Windows will search for the drivers and will assign two COM ports).

More detailed instructions can be found in the BioTrace+ V2017 User Manual on page 9 and 10.
Creation date: 10/5/2016 3:11 PM     Updated: 11/15/2017 3:51 PM